Login Register Forget




回首頁 > Tools operation and usage class > Tools operational manual 人氣 : 36126 留言 : 0 回覆 : 0
Introduction of Crimping Tool

6721-10 crimping pliers

Features:

This product has six functions:
 1 cut the wire
 2 crimping terminals open
 3 Pressure Re bare terminal
 4 off screws
 5. Crimp terminal edge must
 6 stripping wire enclosure

Material: iron - carbon 50C, the handle - PVC, screws - usually iron

Crimping pliers - the function

1 cut the wire 2 crimp terminal openings 3 pressure Wo bare terminals 4 off screws (no need to heat 5. Crimp edge must terminals 6 stripped wire casing

 

Crimp pliers - to use

※The Division uses 5mm and 5mm wire terminal head pay you how to use crimp pliers

Using the jaws of the plastic strip 5mm of skin peel.
Inside diameter near the terminal caps, then use the pressure line from the terminal end of round 4-6 down at the intermediate pressure.
Use crimp terminals insulated terminals at then end of the 2.5-6MM pressed again, more firmly to the terminal.
That's it.

 



每頁筆數 : 10 | 20 | 40
Page : 1 / 1

Tel / 04-23353567 Fax / 4-23353642 E-mail / service@kingtony.com.tw
No 11,150 Alley,516 Lane,2 Sec.Hsi Nan Rd., wu-jih Shiang, Taichung Hsien, Taiwan,R.O.C
Copyright 2010 KING TONY All rights reserved.